GMF-C dry powder filler are applicable for filling any kind of portable and push-type dry powder fire extinguishers, and improved on its past version A and B. Its main part-filter is made of the most advanced material in the world, needs not to be replaced for its service life and is self-cleaned. It can also directly recycle various kinds of dry powder and dose not pollute the environment. It is simple to operate and convenient to move.
□ Power: 0.75kw
□ Irritate the speed of filling: every Minute≥3kg
□ Suttle: 87kg
□ Suitable calibre: 20~80mm
□ Size: 850×550×1230mm

GMD-A automatic nitrogen filler is applicable for filling any kind of nitrogen-driving fire extinguisher with pressure adjustable from 0.1Mpa ~ 2Mpa. It has the advantages of safety, reliability, simple operation and accurate pressure.
□ Power: 0.1Kw 220V
□ Suttle: 30kg
□ Size: 550×650×1100mm

DEH-1 automatic electric dryer can dry the steel cylinder of any kind of fire extinguisher with its hot wind. It can adjust temperature, set time, alarm and stop at a set time. It has the advantages of short time, quick drying and simple operation.
□ Power: 3.3Kw 220V
□ Suttle: 55kg
□ Size: 370×770×1270
□ 15 minutes timing
□ Temperature cortrol: 0-90℃

GMT-BCO2 filler can semi-automatically or full-automatically fill any kind of portable CO2 fire extinguisher. It is mainly composed of the console, hot/cold thermostatic system, electronics scale. It has the advantages of safety, reliability, simple operation, quick filling, accurate measurement and high efficiency.
□ Power in all: 5Kw 380V=4Kw 220V=1Kw
□ Irritate the speed of filling: every minute≤2Kg
□ Weight: host computer: 39kg
□ Heat constant temperature groove: 62kg cold
□ Constant chest: 135kg
□ Size: 550×650×1100mm 520×550×1500mm 900×650×1270mm